Super Street Network

Due to the EU’s Global Data Protection Regulation, our website is currently unavailable to visitors from most European countries. We apologize for this inconvenience and encourage you to visit www.motortrend.com for the latest on new cars, car reviews and news, concept cars and auto show coverage, awards and much more.MOTORTREND.COM
 |   |   |  Project K24 Pt. VI - Paint and Body
Subscribe to the Free
Newsletter

Project K24 Pt. VI - Paint and Body

DTM Autobody gives the Civic VX build a complete color change

Rodrez
Oct 18, 2019

It's been a few months since I put together an update on the Civic VX that, if you remember, once belonged to the staff of Import Tuner about six years ago. At that time it took on a second life, still sporting its original, anemic 1.5L, it was purpose-built to smash MPG numbers. Now as it enters its third iteration, I felt it was long overdue for a makeover, and I couldn't shed its blue exterior-white interior color combination soon enough.

Project K24 Pt VI Civic VX 01 Photo 48/48   |   Project K24 Pt. VI - Paint and Body

DTM Autobody @dtmautobody stepped up to take on the color change and fix a few issues at the same time. I definitely wanted a single color inside and out, and I wanted to get as far away from blue as possible. Usually when I'm picking a color for a project, I take note of other OEM colors on the road. One color that really stuck with me was Subaru's Desert Khaki, used most commonly on their Crosstrek. A flat, understated color that I think really goes well with any contrasting colors I might choose later on down the road, especially black.

Project K24 Pt VI Engine Bay 01 Photo 48/48   |   Project K24 Pt. VI - Paint and Body

To get the car ready for paint, I pulled the factory engine out and then continued removal of just about everything under the hood, from the harness to the brake lines, and anything else that might get in the way.

Project K24 Pt VI engine bay paint prep 01 Photo 48/48   |   Project K24 Pt. VI - Paint and Body
Project K24 Pt VI engine bay paint prep 02 Photo 48/48   |   Project K24 Pt. VI - Paint and Body

DTM repaired a gash in the passenger shock tower that looks like it might have been a result of someone in the past trying to remove the factory airbox mount and just going to far, eventually tearing through the thin metal. The shop did an excellent job fixing that issue along with cleaning up the area just below it, once occupied by the D-series transmission mount, which I removed previously to make room for the Innovative K-series mount.

Project K24 Pt VI subframe Photo 48/48   |   Project K24 Pt. VI - Paint and Body

I cut off a group of studs that occupied space on the firewall for the brake line clips, factory fuel filter and more, and DTM's crew sanded the leftover "stumps" that I couldn't get all the way down, which makes for a much better look. Just a note, I elected to not shave or fill anything under the hood as I wasn't interested in the ultra-smooth look that's incredibly popular, but if that's your style, DTM is more than capable of taking care of your build and making your vision happen. They're experienced in OEM style paintwork and repairs and they have a ridiculously long resume of show car builds under their belt as well.

Project K24 Pt VI personal steering wheel Photo 48/48   |   Project K24 Pt. VI - Paint and Body
Project K24 Pt VI interior stripped Photo 48/48   |   Project K24 Pt. VI - Paint and Body

The cabin of the car was resprayed white when Import Tuner had it, but since I wanted everything a single color I pulled what remained of the interior and it was donated to a friend's project as I had no intentions of ever using pale blue plastics. I pulled the dash, harness, and pedal assembly and after a significant battle, eventually got the aftermarket A/C system and its seized hardware out.

Project K24 Pt VI Interior Sanding 01 Photo 48/48   |   Project K24 Pt. VI - Paint and Body
Project K24 Pt VI Interior Sanding 02 Photo 48/48   |   Project K24 Pt. VI - Paint and Body

The crew at DTM went through every inch of the interior to scuff it up and address any problems. No carpet, rear seats, or panels will make their way back into the car, so it was important to me the cabin be on par with the exterior.

Project K24 Pt VI Civic VX 02 Photo 48/48   |   Project K24 Pt. VI - Paint and Body
Project K24 Pt VI Civic VX 03 Photo 48/48   |   Project K24 Pt. VI - Paint and Body

On the outside, the car was in pretty good condition overall. Civics of this era typically face issues of rust in the rear quarter panels and wheel wells, but being that it was originally a NorCal car, rust wasn't an issue. The Seibon carbon fiber tailgate had spring loaded fasteners riveted to it but I was able to repair the factory latch assembly and asked DTM to remove the rivets and fill the small holes left behind. The hood is also carbon fiber and was set to be painted both top and bottom.

Project K24 Pt VI paint booth 01 Photo 48/48   |   Project K24 Pt. VI - Paint and Body
Project K24 Pt VI paint booth 02 Photo 48/48   |   Project K24 Pt. VI - Paint and Body

After dropping off the car, DTM promised to have it done in a timely manner and they didn't disappoint. When stopped by on multiple occasions to grab a few progress pics and see how things were going, the car appeared to be in a constant state of progress, and before I knew it, they called me to come see the final product.

Project K24 Pt VI Civic VX 04 Photo 48/48   |   Project K24 Pt. VI - Paint and Body
Project K24 Pt VI Civic VX 05 Photo 48/48   |   Project K24 Pt. VI - Paint and Body

It's a massive change going from a bright blue to a lower profile khaki, and as soon as I saw it on this day, fresh out o the booth, I knew I made the right decision, even on the temporary wheels (couldn't use the factory VX wheels due to the EX brake upgrade).

Project K24 Pt VI track life fender cutouts 01 Photo 48/48   |   Project K24 Pt. VI - Paint and Body
Project K24 Pt VI fender polishing Photo 48/48   |   Project K24 Pt. VI - Paint and Body

The factory fenders were cut to make room for a set of Track Life fender cut outs and I asked DTM to attach the trim without the exposed hardware that's included or the badging they come with. Since I have two sets of factory side skirts, I had the slightly scuffed pair smoothed and painted along with the car.

Project K24 Pt VI rear window seals Photo 48/48   |   Project K24 Pt. VI - Paint and Body

The quarter panel windows were replaced by FAL plastic versions when Import Tuner was on a mission to shed weight and I wanted to keep those in place. However, the factory rubber window surrounds were aged and getting brittle, but fortunately I found a brand new set of OEM seals on Instagram thanks to @checkerdsports.

Project K24 Pt VI oem door molding 01 Photo 48/48   |   Project K24 Pt. VI - Paint and Body
Project K24 Pt VI oem windshield molding Photo 48/48   |   Project K24 Pt. VI - Paint and Body

Hunting around online, I also located a complete kit with BNIB OEM Honda front windshield moldings, clips, and inner and outer moldings and seals. The two flat moldings that run down the channels of the roof on either side were also updated with Honda OEM pieces.

Project K24 Pt VI oem door molding 02 Photo 48/48   |   Project K24 Pt. VI - Paint and Body
Project K24 Pt VI oem roof molding Photo 48/48   |   Project K24 Pt. VI - Paint and Body

Fresh paint and new OEM moldings always make for a much better combination.

Project K24 Pt VI Civic VX 06 Photo 48/48   |   Project K24 Pt. VI - Paint and Body
Project K24 Pt VI Civic VX 07 Photo 48/48   |   Project K24 Pt. VI - Paint and Body

Completed quicker than I would have imagined, I headed back to DTM for my last visit, this time accompanied by a flatbed for pick up.

Project K24 Pt VI Civic VX 08 Photo 48/48   |   Project K24 Pt. VI - Paint and Body

A few hours later and the Civic project, sporting its makeover, arrived at my house. Paintwork and dealing with body shops can sometime be a complete nightmare and trust me; I've had a few "episodes" with shops in the past that drove me crazy. With DTM, who isn't just a body shop and repair specialist, but also heavily involved in the enthusiast aftermarket both on a business and personal level, you're dealing with a group that will actually listen and understand what it is you're trying to do. They've got countless projects under their belts from OEM Plus to full blown, handcrafted widebody kits that they've designed, installed and painted. Furthermore, they also have access to countless OEM and aftermarket parts that they can incorporate into your project if needed or desired.

That's it for Pt. VI as I turn my focus toward the 2018 Civic Si build for SEMA, but I'll be back to working on this build soon enough.

Project K24 Pt VI Civic VX 11 Photo 48/48   |   Project K24 Pt. VI - Paint and Body

 

By Rodrez
786 Articles

BROWSE CARS BY MARKET

MORE HOW TO

It was a long week, but the BRZ is done and now headed for a life of commuting and the occasional circuit flogging
Bob HernandezDec 7, 2019
Our friends from Vortech Superchargers drop by early to install one of their kits on the BRZ
Bob HernandezDec 6, 2019
After a couple days of chassis, brake, and cosmetic improvements, we've reached an important juncture in the story arc—getting ready for a boost in power
Bob HernandezDec 5, 2019
New wheels and taillights, some carbon fiber bits, and a headlight restoration job for the BRZ
Bob HernandezDec 4, 2019
Suspension and brakes were slated for Day 1. We're looking to maximize handling and agility on the BRZ and as a side-benefit achieve an improved stance.
Bob HernandezDec 3, 2019
Sponsored Links

SEARCH ARTICLES BY MAKE/MODEL

Search
CLOSE X
BUYER'S GUIDE
SEE THE ALL NEW
NEWS, REVIEWS & SPECS
TO TOP